
Replace Your Old HVAC — Modern Heat Pump Upgrade in Burnaby
Out with the old furnace or A/C, in with a high-efficiency heat pump. We handle full system replacement and disposal.
If you have an aging furnace, an inefficient electric forced-air system, or an older heat pump that's past its useful life, replacing it with a modern heat pump system is one of the most impactful upgrades you can make to your Burnaby property. Modern heat pumps are fundamentally more efficient, quieter, and more capable than systems built even ten years ago — and significantly more so than the gas furnaces that still heat many Burnaby homes.
The average gas furnace in a Burnaby home is over 15 years old. At that age, efficiency has declined, the heat exchanger may be cracked, and the system is approaching the end of its serviceable life. Replacing an aging furnace with a modern air-source heat pump eliminates gas operating costs, reduces emissions substantially, and adds air conditioning that the furnace never provided.
Heat pump replacements for homes with existing ductwork are often the cleanest upgrade path. If your existing air handler is still in good condition, we can replace the outdoor condensing unit and upgrade the indoor coil, tying the new heat pump system into your existing duct distribution. If the air handler is also at end-of-life, we replace both together.
For homes replacing electric baseboard heaters — one of the most common scenarios in Burnaby — the decision is typically whether to go with a ducted or ductless replacement system. Ductless mini-splits are often the simpler choice because they don't require any ductwork installation, but ducted systems provide more even distribution across the home. We'll help you weigh the trade-offs.
Replacing an older heat pump with a current-generation model also delivers significant efficiency gains. Heat pump technology has advanced rapidly over the past decade. Modern systems achieve COP (coefficient of performance) values of 3 to 5 at typical Burnaby operating temperatures — meaning they deliver 3 to 5 kWh of heating for every 1 kWh of electricity consumed. Older systems operating at 1.5 to 2 COP are leaving a substantial efficiency gap on the table.
We handle all aspects of the replacement — disconnecting and disposing of the old system, installing the new equipment, pulling permits, and commissioning. If the old system requires refrigerant recovery, our technicians handle that in compliance with BC refrigerant handling regulations.

What You Can Expect
Out with the Old, In with Efficiency
Modern heat pumps achieve 3–5x the efficiency of older systems and most gas furnaces at typical BC operating temperatures. The energy savings compound over the system's 15–20 year lifespan.
Add Cooling When You Upgrade
Most older Burnaby furnaces have no air conditioning. A heat pump replacement adds cooling simultaneously — one project, one install.
Old Equipment Removal Included
We disconnect, remove, and responsibly dispose of your existing heating system as part of the replacement project. No hauling required on your end.
Rebates Available for Replacements
Replacing a gas furnace or electric baseboard heating with a heat pump often qualifies for CleanBC and BC Hydro rebates. We document the install to meet program requirements.
Common Questions
Should I repair my old furnace or replace it with a heat pump?
This depends on the age and condition of your existing system, the repair cost, and the long-term operating cost comparison. As a general guide: if your system is over 15 years old and facing a major repair, replacement is usually the better financial decision. We can walk you through the comparison for your specific situation.
Do I need to replace my ductwork when I replace the furnace with a heat pump?
In many cases, existing ductwork is compatible with a heat pump air handler. We'll inspect your duct system as part of the assessment. If the ductwork needs modifications for proper airflow at heat pump operating conditions, we'll tell you upfront.
What happens to my gas line when I switch to a heat pump?
If you're fully switching from gas to a heat pump, the gas line to the furnace is capped at the meter or appliance stub-out. Gas service can be cancelled once all gas appliances are replaced. Some homeowners choose to keep a gas connection for a range or fireplace.
Heat Pump Replacement & Upgrade Across Burnaby & Metro Vancouver
Premier Burnaby Heat Pump Installation provides heat pump replacement & upgrade throughout Burnaby and across Metro Vancouver, including Vancouver, Coquitlam, New Westminster, and surrounding communities.
Ready to Get Your Heat Pump Replacement & Upgrade Sorted?
Call us or fill out the form. We'll schedule a free site assessment and give you a clear written quote for your heat pump replacement & upgrade in Burnaby.